Tri-axial Vibration Values (Sawing)
C
| Model | Declared (ahv) (Tri-axial vibration value) |
Uncertainty K | Test code |
|---|---|---|---|
| C6BUY | 2.4 m/s2 | 1.5 m/s2 | EN60745-2-5, Cutting chipboard |
| C6SS | 2.4 m/s2 | 1.5 m/s2 | EN60745-2-5, Cutting chipboard |
| C6U2 | 2.1 m/s2 | 1.5 m/s2 | EN60745-2-5 |
| C7BUY | 2.2 m/s2 | 1.5 m/s2 | EN60745-2-5, Cutting chipboard |
| C7SS | 5.9 m/s2 | 1.5 m/s2 | EN60745-2-5, Cutting chipboard |
| C7ST | 3.3 m/s2 | 1.5 m/s2 | EN62841-2-5 |
| C7U3 | 2.5 m/s2 | 1.5 m/s2 | EN62841-2-5 |
| C8FSE | N/A | N/A | EN62841-3-9 (does not exeed 2, 5) |
| C8FSHE | 1.3 m/s2 | 1.5 m/s2 | EN61029-1, Cutting |
| 0.7 m/s2 | 1.5 m/s2 | EN61029-1, No load |
|
| C9BU2 C9U2 |
2.5 m/s2 | 1.5 m/s2 | EN60745-2-5, Cutting chipboard thickness 44mm |
| C9U3 | 4.1 m/s2 | 1.5 m/s2 | EN62841-2-5 |
CJ
| Model | Declared (ahv) (Tri-axial vibration value) |
Uncertainty K | Test code |
|---|---|---|---|
| CJ90VAST | 12.5 m/s2 | 1.5 m/s2 | EN62841-2-11, Cutting board |
| 13.2 m/s2 | 1.5 m/s2 | EN62841-2-11, Cutting sheet metal |
|
| CJ90VST | 12.5 m/s2 | 1.5 m/s2 | EN62841-2-11, Cutting board |
| 13.2 m/s2 | 1.5 m/s2 | EN62841-2-11, Cutting sheet metal |
|
| CJ110MV | 6.7 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting wood |
| 3.4 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting sheet metal |
|
| CJ110MVA | 11.6 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting wood |
| 6.4 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting sheet metal |
|
| CJ120V | 16.3 m/s2 | 4.5 m/s2 | EN60745-2-11, Cutting wood |
| 13.8 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting sheet metal |
|
| CJ120VA | 14.5 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting wood |
| 12.4 m/s2 | 2.8 m/s2 | EN60745-2-11, Cutting sheet metal |
CR
| Model | Declared (ahv) (Tri-axial vibration value) |
Uncertainty K | Test code |
|---|---|---|---|
| CR13V | 21.3 m/s2 | 2.1 m/s2 | EN60745-2-11, Cutting wood |
| CR13V2 | 21.1 m/s2 | 2.7 m/s2 | EN60745-2-11, Cutting wood |
| CR13VA | 24.5 m/s2 | 1.7 m/s2 | EN60745-2-11, Cutting wood |
| CR13VBY | 7.5 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting wood |
| CR13VC | 21.2 m/s2 | 1.5 m/s2 | EN60745-2-11, Cutting wood |
| CR13VEY | 19.5 m/s2 | 2.0 m/s2 | EN62841-2-11, Cutting board |
| 33.6 m/s2 | 2.6 m/s2 | EN62841-2-11, Cutting woodenbeam |
F
| Model | Declared (ahv) (Tri-axial vibration value) |
Uncertainty K | Test code |
|---|---|---|---|
| FCJ65V3 | 18.3 m/s2 | 2.1 m/s2 | EN60745-2-11, Cutting wood |
| 17.2 m/s2 | 4.3 m/s2 | EN60745-2-11, Cutting sheet metal |